FREE Shipping over $350

← Back to Multi-kits

¾” Ulti Flo Kit + 8″ Ball Float Multi-kit

$224.07 (incl. GST)

25 in stock

SKU: B5811 Category:

Cocky Ulti Flo Float valves are the latest evolution in our range, with a deflector incorporated into the casting of the valve body. They were designed for those farmers who have switched from lower pressure traditional gravity fed systems of the past to high pressure pipelines and pumps. They can be fitted above or below the required water level.

Cocky Ball Floats for stock troughs have fully clamped stainless steel M10 threaded inserts which eliminate any chance of thread stripping. The combination of a metal threaded insert and a strong metal clamp provides the ultimate support when the float is fitted to the end of the arm and has the greatest load. The threads in the Cocky Ball Floats won’t strip, so unlike other manufacturers, do not require a replace.

  • Ulti Flow valve Body with a 3/4” BSPT thread and a 3/4” bore.
  • 300mm M10 Pivot Arm.
  • Short Kit (Contains 2 x M5 Dee shackles with 1 x M10 threaded nipple)
  • 2 x M5 split pins.
  • Patented Universal Adaptor which allows for 12 different float locations.
  • 8” HDPE ball float (200mm)

Superior materials = superior strength

All components of Cocky water trough float valves are made from stainless steel 316. This premium grade stainless steel is far superior in strength to plastic or brass, and has increased corrosion resistance. Using unbreakable stainless steel means we can guarantee a Cocky Valve will not break, even under the most extreme conditions, providing you with the confidence that water will always be there when your stock needs it.

Superior shut off performance

Our Ulti Flo range of float valves can handle either very low (≤ 5 psi – 30kPa) or very high pressure (≥ 150psi – 1050 kPa) installs. They will shut off at over 900kPa (130 psi), with just a 200mm float on a 300mm long lever arm. Shut off pressures ≥ 1350 kPa (200 psi) with increased in-flows can also be achieved if the float size is increased and/or a longer lever arm is used. So whether you need a very low pressure float valve, or a very high pressure float valve, Cocky has you covered.

Superior Flow Rates:

Our Ulti Flo range of float valves will deliver 4 litres per second at just 200kPa and can deliver over 12 litres per second at the higher range of 900kPa. The Cocky valve will deliver all the in-flow rate available at the trough or tank day after day, consistently and reliably.able plastic threaded cap.

Have a question about this product?

Not only are our products reliable, we are too. Give us a call or send us an email using the details here. No matter where you are or what the question is, we’re here to offer advice and guidance so you can get your order in and get back to the important things as quickly as possible!

Lifetime Guarantee

You won’t find a stronger or more reliable stock trough float valve – we guarantee it. Cocky Valve offers a lifetime guarantee against breakage when installed as recommended, so if it breaks – we’ll replace it for free!

1. What’s included in the ¾″ Ulti-Flo Kit + 8″ Ball Float Multi-kit?

Includes a ¾″ Ulti-Flo valve body (BSPT thread and bore), a 300 mm M10 pivot arm, Short Kit (2 × M5 Dee shackles, M10 threaded nipple, and 2 × M5 split pins), a patented universal adaptor providing 12 float mounting positions, and an 8″ (200 mm) HDPE ball float.

2. How is this kit engineered for exceptional strength and reliability?

All components are made from 316-grade stainless steel and feature fully clamped stainless M10 threaded inserts to eliminate thread stripping. It is backed by a lifetime guarantee against breakage when installed as recommended.

3. What pressure and flow performance can be expected?

This kit supports very low pressures (≤ 5 psi / 30 kPa) up to very high pressures (≥ 150 psi / 1050 kPa). It typically shuts off at around 900 kPa (130 psi) with the 200 mm float and 300 mm arm, and delivers up to 4 L/s at 200 kPa and over 12 L/s at higher pressures.

4. Is installation flexible for various trough setups?

Yes. The valve includes an integrated deflector for installation above or below water level, and the universal adaptor allows for 12 different float mounting positions to suit a wide range of setups.

Product Information

Cocky Ulti Flo Float valves are the latest evolution in our range, with a deflector incorporated into the casting of the valve body. They were designed for those farmers who have switched from lower pressure traditional gravity fed systems of the past to high pressure pipelines and pumps. They can be fitted above or below the required water level.

Cocky Ball Floats for stock troughs have fully clamped stainless steel M10 threaded inserts which eliminate any chance of thread stripping. The combination of a metal threaded insert and a strong metal clamp provides the ultimate support when the float is fitted to the end of the arm and has the greatest load. The threads in the Cocky Ball Floats won’t strip, so unlike other manufacturers, do not require a replace.

What the Product Contains
  • Ulti Flow valve Body with a 3/4” BSPT thread and a 3/4” bore.
  • 300mm M10 Pivot Arm.
  • Short Kit (Contains 2 x M5 Dee shackles with 1 x M10 threaded nipple)
  • 2 x M5 split pins.
  • Patented Universal Adaptor which allows for 12 different float locations.
  • 8” HDPE ball float (200mm)
Why Choose Cocky Valve?

Superior materials = superior strength

All components of Cocky water trough float valves are made from stainless steel 316. This premium grade stainless steel is far superior in strength to plastic or brass, and has increased corrosion resistance. Using unbreakable stainless steel means we can guarantee a Cocky Valve will not break, even under the most extreme conditions, providing you with the confidence that water will always be there when your stock needs it.

Superior shut off performance

Our Ulti Flo range of float valves can handle either very low (≤ 5 psi – 30kPa) or very high pressure (≥ 150psi – 1050 kPa) installs. They will shut off at over 900kPa (130 psi), with just a 200mm float on a 300mm long lever arm. Shut off pressures ≥ 1350 kPa (200 psi) with increased in-flows can also be achieved if the float size is increased and/or a longer lever arm is used. So whether you need a very low pressure float valve, or a very high pressure float valve, Cocky has you covered.

Superior Flow Rates:

Our Ulti Flo range of float valves will deliver 4 litres per second at just 200kPa and can deliver over 12 litres per second at the higher range of 900kPa. The Cocky valve will deliver all the in-flow rate available at the trough or tank day after day, consistently and reliably.able plastic threaded cap.

Have a question about this product?

Not only are our products reliable, we are too. Give us a call or send us an email using the details here. No matter where you are or what the question is, we’re here to offer advice and guidance so you can get your order in and get back to the important things as quickly as possible!

Lifetime Guarantee

You won’t find a stronger or more reliable stock trough float valve – we guarantee it. Cocky Valve offers a lifetime guarantee against breakage when installed as recommended, so if it breaks – we’ll replace it for free!

Product FAQs

1. What’s included in the ¾″ Ulti-Flo Kit + 8″ Ball Float Multi-kit?

Includes a ¾″ Ulti-Flo valve body (BSPT thread and bore), a 300 mm M10 pivot arm, Short Kit (2 × M5 Dee shackles, M10 threaded nipple, and 2 × M5 split pins), a patented universal adaptor providing 12 float mounting positions, and an 8″ (200 mm) HDPE ball float.

2. How is this kit engineered for exceptional strength and reliability?

All components are made from 316-grade stainless steel and feature fully clamped stainless M10 threaded inserts to eliminate thread stripping. It is backed by a lifetime guarantee against breakage when installed as recommended.

3. What pressure and flow performance can be expected?

This kit supports very low pressures (≤ 5 psi / 30 kPa) up to very high pressures (≥ 150 psi / 1050 kPa). It typically shuts off at around 900 kPa (130 psi) with the 200 mm float and 300 mm arm, and delivers up to 4 L/s at 200 kPa and over 12 L/s at higher pressures.

4. Is installation flexible for various trough setups?

Yes. The valve includes an integrated deflector for installation above or below water level, and the universal adaptor allows for 12 different float mounting positions to suit a wide range of setups.